How to Clean Roof Shingles: Removing Black Streaks and Algae

How to clean roof shingles safely: what causes black streaks, how sodium hypochlorite works and what percentage to use, how it compares to sodium percarbonate, the downsides of DIY, and how we soft wash shingle roofs.

By Roy Bielewicz

The black streaks on your shingles aren’t dirt. They’re a living algae, and the best way to remove them is a low-pressure soft wash with sodium hypochlorite (SH), not a pressure washer. In this guide we explain what the streaks are, how they damage asphalt shingles, how SH and other roof cleaners compare, what it takes to clean roof shingles yourself, and how we do it at Radiant Clean.

What causes black streaks on roof shingles?

Those dark streaks running down your roof are a type of cyanobacteria called Gloeocapsa magma. Spores travel on the wind and settle on the shady, damp parts of the roof first, which is why the streaks usually start on the north side or under trees and spread downhill as rain carries them. In Florida’s heat and humidity, it grows year-round.

The algae is green underneath. The black color is a protective sheath it builds to shield itself from the sun. The more sun it gets, the darker it turns.


Illustration of how Gloeocapsa magma algae damages asphalt shingles: heat, limestone filler, moisture, and granule loss


How roof algae damages asphalt shingles

Cleaning roof algae isn’t only about looks. Over time, it shortens the life of the roof:

  • It feeds on the shingle. Most asphalt shingles contain limestone filler, and the algae uses it as food.

  • It holds moisture. The colony stays damp long after a rain, keeping water against the shingle surface.

  • It loosens the granules. The ceramic granules on top protect the asphalt from UV rays. As the surface stays wet and breaks down, granules wash off and the shingle ages faster.

  • It makes the roof hotter. Dark streaks absorb more heat than a clean roof, which can raise attic temperatures.

  • It can cause problems with your HOA or insurance. Some HOAs send violation letters for stained roofs, and some insurers flag them during inspections.

Why you should never pressure wash roof shingles

A pressure washer will take the streaks off, but it takes the granules with them. It can also lift the shingle edges and force water underneath, and many shingle manufacturers warn against it. Low-pressure roof cleaning works because the cleaning solution kills the algae, so there’s no need to blast it off. Here’s more on why pressure washing should never be used on roofs.

The best roof cleaner for asphalt shingles

There are a few ways to clean roof shingles. Here’s how the common options compare:


Comparison of roof cleaners for asphalt shingles: sodium hypochlorite is the best choice and works in minutes, sodium percarbonate is slower and good for light staining, spray-and-wait treatments take weeks to months, and pressure washing should be avoided because it strips granules


Sodium hypochlorite

SH is the same active ingredient as bleach and pool chlorine, just at a higher strength than household bleach. It’s what most professional roof cleaners use, because it kills the algae and lifts the stain in a single application, with no scrubbing and no pressure. You can read more about how we use sodium hypochlorite on roofs.

Sodium percarbonate

Sodium percarbonate is an oxygen bleach that comes as a powder. Mixed with warm water, it releases hydrogen peroxide, which breaks down algae and mildew and then turns into water and oxygen. It’s gentler on plants and doesn’t have a chlorine smell. The tradeoff is that it’s slower and weaker on heavy black streaks. It often needs a second application, it has to be mixed fresh and used within a few hours, and it may not fully remove years of growth. We use it in specific situations, but for most heavily stained Florida roofs, SH does the job better.

How sodium hypochlorite works on roof algae


Illustration of how sodium hypochlorite kills roof algae in three steps


When the SH mix hits the roof, hypochlorite starts oxidizing the algae. It breaks down the cell walls and the dark protective pigment at the same time. That’s why you can see shingles change color within minutes. The algae doesn’t just get lighter, it dies, so it takes much longer to grow back than if you scrubbed or blasted it off.

The surfactant is just as important. It works like soap, helping the mix spread evenly and cling to the shingles instead of running straight into the gutters. The longer the solution dwells, the more work it does.

We don’t rinse a shingle roof after cleaning. The SH keeps working as it dwells, the color keeps lifting for several days, and the next rain washes away whatever residue is left. SH breaks down quickly in heat and sunlight, so it doesn’t sit on the roof and eat away at the shingles.

What percentage of sodium hypochlorite do you need?

Strength matters. Too weak and the algae survives. Too strong and you risk damaging plants, staining gutters, and wasting chemical without getting a better result.

  • 3% to 4%: light staining or maintenance cleanings.

  • 5% to 6%: typical Florida roofs with heavy black streaks. This is where we usually work.

  • Above 6%: rarely needed. On a stubborn roof, we’d rather make a second pass than mix it stronger.

Our SH arrives at about 12%, so a 6% mix is roughly one part SH to one part water, plus surfactant. Store-bought household bleach is much weaker, usually 6% to 8% before you add any water, and often contains fragrances or thickeners you don’t want on a roof.

Can you clean roof shingles yourself with a pump sprayer?

You can. Some homeowners mix pool chlorine and water in a garden pump sprayer and treat the roof a section at a time. If your roof is small, single-story, and only lightly stained, it can work. But before you try it, know what you’re signing up for:

  • Cost: an average roof can take dozens of gallons of mixed solution. Between chlorine, surfactant, a good sprayer, a respirator, eye protection, and roof-safe shoes, the supplies add up fast, and you may still need a second round.

  • Time: a two-gallon pump sprayer empties quickly. That means climbing down, mixing, pumping, and climbing back up again and again, usually in Florida heat.

  • Safety: falls are the biggest risk. A roof wet with surfactant is slick, and you’re carrying a sprayer while you walk it. SH also burns eyes and skin and gives off strong fumes.

  • Runoff: gutters collect the solution and dump it out of the downspouts. Without preparation, you can end up with dead patches of grass and burned shrubs right where the downspouts drain.

  • Uneven results: it’s easy to miss spots or apply the mix unevenly, which can leave the roof streaky.

If you do try it yourself, soak your plants and grass with water before you start, bag or redirect the downspouts, keep watering plants while you work, rinse them well when you’re done, and never use a pressure washer.

How Radiant Clean cleans shingle roofs


Shingle roof partway through soft washing, with cleaned shingles on the left and black algae on the right


We use equipment built specifically for soft washing roofs:

  • A proportioner system that blends SH, water, and surfactant at an exact strength, so every section of the roof gets the same mix.

  • Bulk 12% sodium hypochlorite, bought fresh, so we know exactly what strength we’re starting with.

  • A low-pressure soft wash pump and long hose, with roof nozzles that throw the solution across the roof. We spend less time walking on wet shingles and get even coverage.

  • Plant protection: we pre-soak the landscaping before we start, keep it wet while we apply the mix, and rinse it again when we’re done. We also bag the downspouts and treat the runoff with a bleach neutralizer so it doesn’t harm your grass and plants.

  • Safety gear: respirators, non-slip roof boots, and liability insurance for the work we do on your roof.

Because the mix kills the algae instead of just removing the stain, a professionally cleaned roof stays clean longer. In Florida, most roofs need it every two to four years, depending on shade and tree cover.


Shingle roof before and after soft washing


Wondering what it costs? Here’s our guide to roof cleaning costs in the Tampa region. Have a tile roof instead? See how to clean a tile roof without breaking tiles.

Get a free roof cleaning quote

If black streaks are spreading across your shingles, we can get them off safely, without pressure and without hurting your landscaping. Learn more about our roof cleaning service or request a free estimate.

Ready for a radiant clean?

Get a free, no-obligation estimate for your home or business in the greater Tampa area.

Get in touch

Free Estimate

Ready to experience a cleaner home or business exterior? Contact us today for a free estimate.

Contact Us